Mr. Heater F215100 MH4B Little Buddy 3800-BTU Indoor Safe Propane Heater, Medium

Product Information

Required BTUs) If you have measured temperature in Celsius, calculate the required BTUs with this formula: (Cubic Feet x Temperature Increase x . Two heat settings enable you to alternate between 4,000 and 9,000 BTUs per hour to heat an indoor space up to 200 square feet (according to the manufacturer). Only problem I have found is the bottom piece you place on propane tank does not secure properly and falls off when lifted off the ground to move the heater.

If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. Because it gets so hot, I was slightly nervous using it in my tent the first couple of times since there is always the chance something can catch on fire but the Little Buddy has an accidental tip-over safety shut-off feature. With the Oxygen Depletion Sensor (ODS) and accidental tip-over safety shut-off, you can be sure that you will enjoy years of comfortable outdoor safe heat. You can calculate the amount of BTUs required by using the following method: Measure the space’s dimension to determine cubic feet.As much as I like the Little Buddy Heater for its power output and efficiency, it does have its drawbacks.

Have tried the cleaning method described in the manual but it is very hard to take apart and nothing seems to help. The little buddies I've had are lucky to make an ice season before getting had to light and the just quitting.With a larger heating surface, fold-down handle, swivel-out fuel connection, and an easy-start four-position control, Mr. The easy operation and safety features are sensibly designed, and it seems to be well-made and reliable. Heater is more reliable and I should probably just stick with those but the smaller size and a bit less btu's just works better in my tiny and very well insulated fish house. Looks like it’s made pretty durable, the igniter works good, like the carry handle, the metal shield cools down pretty quick if you want to move spots.