Lifetree Window Film Privacy: Privacy Film for Glass Windows Non-Adhesive No Glue Window Film Reeded Glass Decorative Patterned Static Cling Films for Home 44.5 * 200cm

Product Information

Using a pair of sharp scissors, cut the material roughly to size (We recommend 20mm extra on the Width and Height to allow the material to be cut to the shape of the glass) It is also advisable to make sure the Top of your film is straight and in line/square with any pattern. After the film has been applied, dry every edge and the surface with a paper towel. Be thorough and careful, especially in the corners. Make sure all the water, or as much as possible, has been removed from behind the film. Place the Green Card Squeegee on the film and against the edge of the glass, then place the blade of your knife against this. This will guide your knife and protect your window frames and gaskets. Note: Making a diagonal cut between the corner of the glass and excess film prevents creasing the corner of the material while trimming. Wetting solution is the secret ingredient to a smooth, seamless installation. Make a solution by adding 8-10 drops of a mild, non-moisturizing dish detergent (Dawn or Joy; do not use hand soap) to a 32-oz. spray bottle filled with clean water (adjust ratio for smaller or larger bottles). More soap may be needed when applying film to acrylic surfaces. Mix well.

With the exception of films specifically labeled and made for exterior application, always install film on the interior of a window. Film applied to the exterior will easily fail due to exposure to the elements.Translucent embossed vinyl film. Ideal for obscuring direct visibility and allows excellent light transmission. This designer-look is easier than ever to achieve at home, thanks to Purlfrost’s easy application. Once your made-to-measure reeded glass film arrives, spray the window and film with water and apply, making sure to smooth out any air bubbles and wrinkles – it’s as simple as that. The possibilities are endless; from internal and external windows to kitchen cabinets, shower screen through to a freestanding cupboard or even a glass coffee table.

Specification Details for SX-1255 1 Reeded Glass - Decorative Glass Film (Films & Coatings for Glass) Please ensure that your specifications are correct and complete, as UK Glass Centre will not acceptBefore you do any actual cutting, you should consider where to place the seam on the window. You will usually have options when deciding: do you want it vertical or horizontal? Higher or lower? It may depend on the width of the roll you are working with, but generally you’ll want to place it where it is least noticeable. If you have tall windows, placing it at the top will make it harder to see. If it is darker at the bottom or people tend to look toward the top more often, then placing it at the bottom will be the best method. Sometimes called Fluted glass, this is a textured stripe finish moulded into the glass surface. Multiple flutes are side-by-side with a common 1/2-inch or 1/4-inch spacing. The pattern bends light as it passes through the glass and this obscures your vision. Why is Reeded glass texture so popular?

This pumpkin cast iron dish has become my favourite piece of cookware I'll be using long after Halloween Thoroughly spray and soak the glass surface AND the static side of the film with the water mixture. Wetter is better! There is no such thing as too much water. The water will allow you to easily apply and reposition the film before you squeegee—and any excess water will evaporate after the film fully clings. Our glass films are available in a large variety of textures and designs at a fraction of the cost of laminated panels, patterned, or sand blasted glass. This film simulates real reeded glass. Bands are 13mm wide and band direction is vertical, down the length of the roll. All films can be easily removed without any damage to the glass. Begin by peeling the film away from one corner of the glass and pulling down until the entire panel is removed. If any adhesive remains, it can be easily removed with window cleaner, soapy water or a single-edge razor blade.Starting at the top and working down to the bottom, push all the water out towards the edges. Repeat on the other side.